PLASTYN
®

melamine resin based superplastisizer* for hydraulic binding mortar like concrete and gypsum




Desmepolplastyn©
Products
Liquid
Powder
M.S.D.S.
CE
* EP 0690083
Samples


Desmepol B.V.




Product name:
PLASTYN® 35% PLASTYN® 40%
Category: Superplasticizer Superplasticizer
Side effects:
None None
Manufacturer:
ChemCom Industries B.V. ChemCom Industries B.V.
State of aggregation:
Liquid Liquid
Volumatic ratio:
1,22      ± 0,03 g/ml 1,26      ± 0,03 g/ml
pH-value:
8,5 - 11 8,5 - 11
Concentration:
35  ± 2% m/m 40 ± 2% m/m
Chloride content: < 0,010 % m/m (chloride-free) < 0,010 % m/m (chloride-free)
Free formaldehyde:
< 0,15% < 0,15%
Effective material:
Melamine-formaldehyde-sulfonate Melamine-formaldehyde-sulfonate
Water solubility:
Complete
Complete


HEALTH AND ENVIRONMENTAL ASPECTS:

See material safety data sheet. Additives for concrete and gypsum are chemical products. Avoid skin contact. In the unexpected event of skin contact generously rinse with lukewarm water.


DIRECTION FOR PROCESSING AND DOSAGE:

Properties: PLASTYN® is being used as well in cement as gypsum in order to plasiticize hydrolytic mortars or to increase the compressive strength.   

Method and moment of dosage:
must be added to the cement,concrete mix or gypsum just before processing and after intensive mixing
Temperature above which the product can be processed:
+ 5°C
Recommended dosage: 0,5 to 1,5% of the cement/gypsum mass
Minimum dosage: 0,3% of the cement/gypsum mass
Maximum dosage:
3,0% of the cement/gypsum mass
Best used before: 1 year (for use 1 year after delivery, we advise  you to  contact ChemCom Industries B.V.)
Suitable for:
Concrete and reinforced concrete, prestressed concrete, gypsum and anhydrite.
Storage: Store at a temperture above 0°C. PLASTYN® is a waterborne resin and will freeze. After melting it can be used again.