PLASTYN
®

melamine resin based superplastisizer* for hydraulic binding mortar like concrete and gypsum




Desmepolplastyn©
Products
Liquid
Powder
M.S.D.S.
CE
* EP 0690083
Samples


Desmepol B.V.




Product name:
PLASTYN® SP
Category: Superplasticizer
Side effects:
None
Manufacturer:
ChemCom Industries B.V.
State of aggregation:
Powder
Volumatic ratio:
0,73      ± 0,03 g/ml
pH-value:
7,5 - 9    5% solution
Concentration:
94  ± 2% m/m
Chloride content: < 0,010 % m/m (chloride-free)
Free formaldehyde:
< 0,15%
Effective material:
Melamine-formaldehyde-sulfonate
Water solubility:
Complete


HEALTH AND ENVIRONMENTAL ASPECTS:

See material safety data sheet. Additives for concrete and gypsum are chemical products. Avoid skin contact. In the unexpected event of skin contact generously rinse with lukewarm water.


DIRECTION FOR PROCESSING AND DOSAGE:

Properties: PLASTYN® is being used as well in cement as gypsum in order to plasiticize hydrolytic mortars or to increase the compressive strength.   

Method and moment of dosage:
must be added to the dry cement,concrete mix or gypsum with intensive mixing
Temperature above which the product can be processed:
+ 5°C
Recommended dosage: 0,5 to 2% of the cement/gypsum mass
Minimum dosage: 0,3% of the cement/gypsum mass
Maximum dosage:
3,0% of the cement/gypsum mass
Best used before: 1 year (for use 1 year after delivery, we advise  you to  contact ChemCom Industries B.V.)
Suitable for:
Concrete and reinforced concrete, prestressed concrete, gypsum and anhydrite.
Storage: Store PLASTYN® dry in closed packing, humidity will cause cacking and makes dosing very difficult.